The Lambda100 system improves the quality of combustion through the analysis of the exausting smoke. The system controls the devices regulating combustion, keeping it within optimal set-point parameters, by managing both secondary post-combustion and primary combustion.
Description
Supply Voltage | 230/115 Vac 50/60 Hz |
Lambda sensor input | Bosch LSU 4.9 |
Communication interface | RS232 RS485 |
Dimensions | Board 145×105 mm; Box 150x110x80 mm |
Output to control | 05 On/Off 5A 250 Vac 03 Triac 1A 250 Vac |
Low temperature measurement range | -40 ÷ 80/120/200 °C |
High temperature measurement range | -40 ÷ 900/1250 °C |
Additional modules | – Outputs 0 ÷ 10 Vdc – Iputs AUX – Double Encode |
Related products
-
CP115
0,00€CONTROL PANEL USER INTERFACE
Thanks to its smart design, CP115 can be placed even in small stoves.
Through CP115 it is possible to:
Select options Details
• Display information about system functioning
• Display and set system functioning parameters
• Display system temperature during its functioning
• Set on/off programs with chrono-thermostat mode -
CONTROL PANEL WITH LCD DISPLAY
The K100 features a multilingual menu. Its LCD display with backlight allows to easily monitor all the information related to the heating system.
Select options Details -
K500
0,00€CONTROL PANEL WITH LCD DISPLAY
The K500 features a multilingual menu. Its LCD display with backlight allows to easily monitor all the information related to the heating system.
The K500 is available in the variants with mechanical keyboard, touch and glass.
Select options Details -
NG21 allows the management and the optimization of the combustion of stoves with solid combustible Biomass such as Wood, Pellet, Maize and similar in the version control board for biomass:
- AIR with air excangher
- HYDRO with water excangher
- SYSTEM
It can be plug in:
- All control panels TiEmme elettronica
- Reading input devices
- Control outputs devices
- Serial dialogue modules RS 232, RS 485
• CLEANING ENGINES
Details
3 different sets of cleaning engines working in every functioning phase of the system and satisfying the most complicated applications for the brazier cleaning engine or the most common applications of ash removal and turbulators cleaning
• SOFT MODE
Modality for the end user dedicated for reducing the noisy of fans and auger
• AIR GENERATOR
Compatibility with air generator systems that require higher temperature than water
• PLANTS MANAGEMENT
11 set of plumbing plants for the hydro version, including anticondensation and top/bottom buffer management, and 12 canalization configurations for air version
• SOLAR COLLECTOR
The hydro version allows the management of the solar collector pump (PWM or standard one) in combination with plumbing plants with Buffer or DHW boiler.
• TEMPERATURE UNIT
The system manages the two principal units of measure for temperature °C and °F, allowing the user to choose the best solution
• SERVICE MENU
Dedicated menu for the installer in the LCD control panels
• NIGHT MODE
Modality dedicated for reducing the noisy motors in the night time
• BACK UP
Back up source of heating management when the solar system is enabled
• BRUSHLESS MOTOR
Possibility to manage brushless gear motor with control in PWM or 0÷10 V
• REFILL
This function provides an estimate of the remaining pellet in the tank and alerts the user via keyboard or via app of the refilling needs
• RADIO 2WAYS2
Radio control compatibility that can be paired to the system in after sales -
COLOUR TOUCH SCREEN CONTROL PANEL
The innovative K400-4.3″ & K700-7″ colour LCD-TFT are equipped with a capacitive multi-touch display. Thanks to the ARM® Cortex®-M7 core, TiEmme elettronica can offer a sophisticated colour touchscreen display with smooth animation and powerful graphics.
Details
The displays are capable of showing detailed and colourful graphics of specific hydraulic plants with moving motors and fans.
All the projects have been created for a sustainable and flexible firmware Architecture for future upgrades and features. -
SY400
0,00€The SY400 allows to manage the combustion of stoves, burners, boilers and thermo-fireplaces. With 16 outputs in total, it represents TiEmme’s top of the line. It is the ideal product for those who need extreme adaptability and customization.
Select options Details