CONTROL PANEL FOR USER INTERFACE
CP120 is designed to have all funcionalities at hand, making it very useful even during the first stage of installation.
0,00€
CONTROL PANEL FOR USER INTERFACE
CP120 is designed to have all funcionalities at hand, making it very useful even during the first stage of installation.
Housing | ABS |
Keys | 8 |
Indication LEDs | 8 |
Communication interface | 2 display a 4 digit |
Dimensions | 154X56X16 mm |
The CP110 control panel implements all the features while maintaining compact dimensions and a low price.
Through the panel it is possible to:
• Show the system functioning information
• Show and modify the system functioning parameters
• Show the system functioning temperature
• Set ignition and extinguishing programs in the crono-thermostat modality
CP110 can be requested with mechanical keyboard, soft touch and glass.
Select options DetailsCONTROL PANEL WITH LCD DISPLAY
The LCD100 features a multilingual menu. Its LCD display with backlight allows to easily monitor all the information related to the heating system.
The LCD100 is available in the variants with mechanical keyboard, touch and glass.
Select options DetailsCONTROL PANEL WITH LCD DISPLAY
The K100 features a multilingual menu. Its LCD display with backlight allows to easily monitor all the information related to the heating system.
Select options DetailsHandy, ergonomic device. Extreme attention to detail. It can be wall mounted with magnets. It has touch sensitive keys for switching on & off the stove or boiler, access to user/installer menu for immediate function monitoring.
You can choose where to place the two-way “WAYS2” Radio control, in a discreet and functional way. The magnet wall mount allows for easy removal and storage of the 2WAYS2 device.
LCD RADIOCONTROLLER
FEATURES
Modernly designed 4keys Remote control, compact pocket format.
Led signals the operating state.
Instruction for remote control setting will be sent with it.
The NG24 is a temperature controller and control board. It allows to manage and optimize combustion in any kind of solid biomass stove burning pellet, corn or similar in the variants:
Loader500 is an electronic controller that allows to manage filling and loading systems for biomass chopped fuels with the highest efficiency and precision. By using level and proximity sensors, it controls the devices of the implant, allowing to set their parameters and optimizing their functioning.
Inputs connected and monitored:
– Material Level Sensor (up to 4)
– Position Sensors
– Contact/LimitSwitch
Outputs connected for the devices control:
– Auger Loading Motors
– Extractors Motors
– Alarms
NG21 allows the management and the optimization of the combustion of stoves with solid combustible Biomass such as Wood, Pellet, Maize and similar in the version control board for biomass:
It can be plug in:
• CLEANING ENGINES
3 different sets of cleaning engines working in every functioning phase of the system and satisfying the most complicated applications for the brazier cleaning engine or the most common applications of ash removal and turbulators cleaning
• SOFT MODE
Modality for the end user dedicated for reducing the noisy of fans and auger
• AIR GENERATOR
Compatibility with air generator systems that require higher temperature than water
• PLANTS MANAGEMENT
11 set of plumbing plants for the hydro version, including anticondensation and top/bottom buffer management, and 12 canalization configurations for air version
• SOLAR COLLECTOR
The hydro version allows the management of the solar collector pump (PWM or standard one) in combination with plumbing plants with Buffer or DHW boiler.
• TEMPERATURE UNIT
The system manages the two principal units of measure for temperature °C and °F, allowing the user to choose the best solution
• SERVICE MENU
Dedicated menu for the installer in the LCD control panels
• NIGHT MODE
Modality dedicated for reducing the noisy motors in the night time
• BACK UP
Back up source of heating management when the solar system is enabled
• BRUSHLESS MOTOR
Possibility to manage brushless gear motor with control in PWM or 0÷10 V
• REFILL
This function provides an estimate of the remaining pellet in the tank and alerts the user via keyboard or via app of the refilling needs
• RADIO 2WAYS2
Radio control compatibility that can be paired to the system in after sales
COLOUR TOUCH SCREEN CONTROL PANEL
The innovative K400-4.3″ & K700-7″ colour LCD-TFT are equipped with a capacitive multi-touch display. Thanks to the ARM® Cortex®-M7 core, TiEmme elettronica can offer a sophisticated colour touchscreen display with smooth animation and powerful graphics.
The displays are capable of showing detailed and colourful graphics of specific hydraulic plants with moving motors and fans.
All the projects have been created for a sustainable and flexible firmware Architecture for future upgrades and features.