CONTROL PANEL FOR USER INTERFACE
CP120 is designed to have all funcionalities at hand, making it very useful even during the first stage of installation.
Description
| Housing | ABS |
| Keys | 8 |
| Indication LEDs | 8 |
| Communication interface | 2 display a 4 digit |
| Dimensions | 154X56X16 mm |
You may also like…
-
Handy, ergonomic device. Extreme attention to detail. It can be wall mounted with magnets. It has touch sensitive keys for switching on & off the stove or boiler, access to user/installer menu for immediate function monitoring.
You can choose where to place the two-way “WAYS2” Radio control, in a discreet and functional way. The magnet wall mount allows for easy removal and storage of the 2WAYS2 device.LCD RADIOCONTROLLER
- Bidirectional wirless connection
- Touch keys
- Transmission range up to 10 m
- AA batteries power supply
- Easy magnetic wall-mounted support
FEATURES
- Implant functioning displaying
- Ambient temperature reading
- Programmable ambient thermostat
- Direct control buttons
- Date/time set and Crono programming
- User menu and password-protected installer menu
-
LCD100
0,00€CONTROL PANEL WITH LCD DISPLAY
The LCD100 features a multilingual menu. Its LCD display with backlight allows to easily monitor all the information related to the heating system.
The LCD100 is available in the variants with mechanical keyboard, touch and glass.
Select options Details -
CONTROL PANEL WITH LCD DISPLAY
The K100 features a multilingual menu. Its LCD display with backlight allows to easily monitor all the information related to the heating system.
Select options Details -
The CP110 control panel implements all the features while maintaining compact dimensions and a low price.
Through the panel it is possible to:
• Show the system functioning information
• Show and modify the system functioning parameters
• Show the system functioning temperature
• Set ignition and extinguishing programs in the crono-thermostat modalityCP110 can be requested with mechanical keyboard, soft touch and glass.
Select options Details
Related products
-
Out of stock
LOADER 500
0,00€Loader500 is an electronic controller that allows to manage filling and loading systems for biomass chopped fuels with the highest efficiency and precision. By using level and proximity sensors, it controls the devices of the implant, allowing to set their parameters and optimizing their functioning.
Inputs connected and monitored:
– Material Level Sensor (up to 4)
– Position Sensors
– Contact/LimitSwitchOutputs connected for the devices control:
Details
– Auger Loading Motors
– Extractors Motors
– Alarms -
NG21 allows the management and the optimization of the combustion of stoves with solid combustible Biomass such as Wood, Pellet, Maize and similar in the version control board for biomass:
- AIR with air excangher
- HYDRO with water excangher
- SYSTEM
It can be plug in:
- All control panels TiEmme elettronica
- Reading input devices
- Control outputs devices
- Serial dialogue modules RS 232, RS 485
• CLEANING ENGINES
Details
3 different sets of cleaning engines working in every functioning phase of the system and satisfying the most complicated applications for the brazier cleaning engine or the most common applications of ash removal and turbulators cleaning
• SOFT MODE
Modality for the end user dedicated for reducing the noisy of fans and auger
• AIR GENERATOR
Compatibility with air generator systems that require higher temperature than water
• PLANTS MANAGEMENT
11 set of plumbing plants for the hydro version, including anticondensation and top/bottom buffer management, and 12 canalization configurations for air version
• SOLAR COLLECTOR
The hydro version allows the management of the solar collector pump (PWM or standard one) in combination with plumbing plants with Buffer or DHW boiler.
• TEMPERATURE UNIT
The system manages the two principal units of measure for temperature °C and °F, allowing the user to choose the best solution
• SERVICE MENU
Dedicated menu for the installer in the LCD control panels
• NIGHT MODE
Modality dedicated for reducing the noisy motors in the night time
• BACK UP
Back up source of heating management when the solar system is enabled
• BRUSHLESS MOTOR
Possibility to manage brushless gear motor with control in PWM or 0÷10 V
• REFILL
This function provides an estimate of the remaining pellet in the tank and alerts the user via keyboard or via app of the refilling needs
• RADIO 2WAYS2
Radio control compatibility that can be paired to the system in after sales -
NG00 allows the management and the optimization of the combustion of stoves with solid combustible Biomass such as Wood, Pellet, Maize and similar in the version control board for biomass:
- AIR with air excangher
- HYDRO with water excangher
- SYSTEM
It can be plug in:
- All control panels TiEmme elettronica
- Reading input devices
- Control outputs devices
- Serial dialogue modules RS 232, FLAT
The NG00 board can be provided with terminal:
- crimp terminals (F series)
- screw terminals (S series)
-
Modernly designed 4keys Remote control, compact pocket format.
Details
Led signals the operating state.
Instruction for remote control setting will be sent with it. -
CP115
0,00€CONTROL PANEL USER INTERFACE
Thanks to its smart design, CP115 can be placed even in small stoves.
Through CP115 it is possible to:
Select options Details
• Display information about system functioning
• Display and set system functioning parameters
• Display system temperature during its functioning
• Set on/off programs with chrono-thermostat mode -
CONTROL PANEL WITH LCD
The LCD200 is the most complete option of the line. Together with the features available on the other panels by TiEmme, LCD200 also comes with a general switch and a safety thermostat.
The LCD200 is available in the variants with mechanical keyboard, touch and glass.
Select options Details
